- Home
- ยป
- Our Products
- »
- Remote Monitoring Systems
Remote Monitoring Systems
Solar roof top monitoring
Industrial automation
Remote Monitoring System
Minimum Order Quantity: 50 Piece
Brand | Rutav |
Frequency | 50Hz |
Supply Voltage | DC Input 80V to 800V DC |
AC Input Range | 90V to 440V AC |
MCU | Atmel ARM Cortex M0+ 32 bit |
GSM or GPRS | Quad Band 850/ 900/ 1800/ 1900 MHz |
USB Interface | Inbuilt Micro USB 2.0 |
Ambient Temperature | 0 Degree C to 60 Degree C |
Here are some of the other key benefits:
- Real-time Pump data and ON/OFF mechanism available for farmers using mobile phone.
- Real-time data for monitoring and energy saving measurements for Government and Regulatory authorities.
- Real time data like Water flow, Water output/day, Solar DC Voltage, DC ampere, Instantaneous Power, Energy (Kwh), AC output Voltage, Total UP time.
- Real time Alarm & faults monitor.
Additional Information:
- Production Capacity: 5000 pieces/month
Wifi Solar Monitoring Unit
Minimum Order Quantity: 50 Piece
Brand | Rutav |
Supply Voltage | 7 V- 24 V DC OR 5 V DC |
Wifi Frequency Range | 2.4Ghz ~ 2.5Ghz |
NetworkProtocols | IPv4,IPv6, SSL,TCP/ UDP/ HTTP/ FTP/ MQTT |
Ambient Temperature | 0 Degree C to 60 Degree C |
MCU | Atmel ARM Cortex M0+ 32 bit |
Overview
The Wi-Fi stick is an easy to install device to monitor mostly all brands roof top grid tied inverters (INVT, Delta, ABB, Sungrow, Kstar, Solax etc.) It is plugged into the inverter's RS485 port and communicates via the WiFi signal of your local internet router. The stick reads the inverter data which is used to pro-actively monitor the performance of your system and visualized on the web. It has a waterproof enclosure so it can be used outdoor just like the inverter
Here are some of the other key benefits
Real-time data monitoring and energy saving measurements for Government and Regulatory authorities
Real time data like Total power generation(kwh) per day, month & year wise, DC voltage string wise , DC input current , Output voltage etc.
Real time Alarm & faults monitor
System Consisting of
1) On Grid inverter (RS-485 facility Enabled)
2) Wifi Stick support standard Modbus RTU
3) User friendly Remote monitoring software(web,android,IOS)
Wift based control card specifications
Parameters | Specifications |
Supply Voltage | 7V-24V DC OR 5V DC |
Reverse Polarity Protection | Yes |
MCU | Atmel ARM Cortex M0+ 32 bit
|
WIFI | Protocols 802.11 b/g/n (802.11n up to 150 Mbps) Frequency Range 2.4Ghz ~ 2.5Ghz NetworkProtocolsIPv4,IPv6,SSL,TCP/UDP/HTTP/FTP/MQTT Transmitting Power 20.5 dBm |
Storage | Inbuilt Flash which will store the data whenever WIFI network not available (3-4 months data backup considering data send interval time 15 min.) |
|
|
RS-485 Interface | Support Standard Modbus RTU protocol To read/write parameters of Inverter |
|
|
LED indication | RS485 Communication status Wifi Connectivity Power On |
Ambient Temperature | 0 DegreeC to 60 DegreeC
|